Back to Blog
Tips & Care 2026-11-15 Grado Labs 0 views

S-Cushions Wearing Out? Signs It's Time to Replace Them

S-Cushions Wearing Out? Signs It's Time to Replace Them

Learn how to spot worn Grado S-Cushions, what changes to expect, and when a fresh set is the right fix. Includes fit and compatibility details.

Start with the fit, not the sound

Before you blame the drivers, check the cushions. Grado S-Cushions are the foam pads that sit between your ears and the headphones. When the foam flattens, hardens, or starts to crumble, the pad no longer holds its shape. That changes how the headphone sits on your head, and it can change what you hear.

The tricky part is that wear happens slowly. You adjust to a slightly looser fit or a little less bass without noticing. The signs below help you judge whether the cushions are the problem or whether something else deserves attention.

Signs your S-Cushions are due for replacement

These are practical, visible checks. None of them requires special tools.

  • The foam no longer springs back: Press a cushion gently with your thumb. A healthy foam pad rebounds quickly. If the indentation stays or the pad feels compressed and thin, the foam has lost its resilience. Flattened foam is the most common reason a Grado headphone starts to feel loose.
  • Visible cracks, tears, or crumbling edges: Inspect the rim where the cushion meets the earcup. Small splits or a powdery, crumbling texture mean the foam is breaking down. Once the edge starts to fail, the cushion can slip or sit unevenly.
  • The headphone feels looser or sits differently: If you find yourself pushing the earcups back into place more often, or the pads feel like they are sliding, the foam has likely thinned. This is a fit issue first. Any change in sound is secondary and harder to pin down.
  • You notice a change in bass or isolation: Worn foam can reduce the seal around your ears, and that can make the low end feel weaker. Treat this as a possible symptom, not a diagnosis. Grado headphones are open-back by design, so some sound leakage is normal. Compare with a fresh set of cushions before drawing conclusions about the drivers.
  • The cushions look discolored or feel stiff: Foam that has hardened or darkened over time is usually past its best. Stiff foam does not conform to the shape of your head as well, which can make longer listening sessions less comfortable.

What worn foam can and cannot explain

It is tempting to blame every change in sound on the cushions. Be careful here. Worn foam can affect fit and comfort, and a poor seal can change how bass feels. But Grado does not publish a measured sound difference for worn versus new S-Cushions, and you should not assume a new set will transform the headphone.

If you hear a rattle, a buzz, or a channel cutting out, those are not cushion symptoms. Replacing the foam will not fix a driver or cable problem. The cushion check is about fit, comfort, and the condition of the foam itself.

The replacement part: Grado S-Cushions

  • Grado Headphone Replacement S-Cushions: Consumer-replaceable genuine Grado ear cushions. You can replace the foam yourself. You do not need to send the headphone in for a cushion change.
    Grado Headphone Replacement S-Cushions
    Grado Headphone Replacement S-Cushions
  • Grado Headphone Replacement S-Cushions: Standard equipment on all series of the SR60, SR80, and SR125 headphones. If you own one of these models, the S-Cushions are the original fit. A fresh set restores the shape and feel the headphone was designed around.
  • Grado Headphone Replacement S-Cushions: Also fits all Prestige, Reference, Statement, Professional, and Limited Edition headphones. Compatibility extends well beyond the SR60, SR80, and SR125. Check your model against this list before ordering.

When replacement is the right move

Replace the S-Cushions when the foam has visibly failed: it no longer rebounds, the edges are cracking, or the pad feels stiff and thin. If the headphone still fits comfortably and the foam looks and feels intact, you can hold off. There is no fixed replacement schedule in the supplied information, so judge by condition rather than by a calendar.

One practical note: cushions wear as a pair. If one side is flattened or torn, replace both. A mismatched pair can make the headphone sit unevenly and feel different from left to right.

A simple check before you order

Run through these steps in order. They help you confirm the cushions are the issue and that you are ordering the right part.

  1. Identify your Grado model: Look at the headband or the earcup housing for the model name. The S-Cushions are standard on the SR60, SR80, and SR125, and they also fit all Prestige, Reference, Statement, Professional, and Limited Edition headphones.
  2. Inspect both cushions in good light: Check for flattening, cracks, crumbling edges, stiffness, and discoloration. Compare the left and right pads. If one is clearly worse, both still need replacing as a set.
  3. Do the press-and-release test: Press each cushion with your thumb and release. Slow rebound or a lasting dent means the foam has lost resilience.
  4. Rule out non-cushion problems: If you hear buzzing, rattling, or a dead channel, the cushions are not the cause. Those symptoms point to the driver or cable, and a new set of foam pads will not correct them.

What the supplied information does not cover

The supplied product record does not include a cleaning routine, a lifespan estimate, or installation instructions. It also does not state a measured sound difference between worn and new S-Cushions. If you need those details, check Grado's own documentation rather than guessing. What the record does confirm is the part itself: genuine, consumer-replaceable S-Cushions that fit the models listed above.

Related Articles

Customer Service
Home
Products
Cart
Profile